Skip to content

Intelligent solutions. Sustainable impact.

Engineering that makes every kilowatt count.

LumiVerde is an independent engineering consultancy for businesses and institutions (in both commercial and industrial sectors). Our experience and operations span across Europe, the Middle East, and Africa — combining energy expertise, rigorous engineering, and practical consulting.

Illustration of rooftop solar PV on an industrial building, with wind turbines and a cable run to the inverter

Level II & III energy audits

178 kWpPV-diesel hybrid · Serhal Hospital

LumiVerde at a glance

Industrial and commercial energy audits, Level II & III
200+
20+ LCCA, feasibility studies, and technical grant proposals
LCCA
150+ RE & EE projects designed and commissioned
Commissioning
Operating in 10+ countries across Europe, the Middle East, and Africa — and beyond:ItalyFranceSpainKSAUAEOmanLebanonCARZimbabweSouth Sudanand more
10+ Countries

Organisations and programmes we’ve worked with

  • UNDP
  • UN-ESCWA
  • KfW
  • DanChurchAid
  • TIF Project - USAID-funded
  • ICUREESTART · REFIT · Bright · TESSA
  • LCEC
  • Alpin LimitedAlpin
  • Apave
  • LASCO

What we do

Three disciplines. One accountable partner.

  • Energy

    Energy audit

    • Industrial and commercial energy audits, Level II & III
    • Site measurements and efficiency tests: combustion analysis, power logging, thermal imaging
    • Energy Efficiency Measures (EEMs) recommended, each with cost, savings and payback

    Renewable energy

    • Solar PV design from 1 kWp to MWp: on-grid, off-grid, hybrid and solar pumping
    • Solar thermal system design
    • Installation and commissioning of PV and solar thermal systems

    Energy efficiency

    Design & install:

    • Variable frequency drives (VFDs) on motor-driven systems
    • Thermal insulation of pipes and the building envelope
    • Lighting retrofits
    • Heat recovery solutions
    • Hot water systems for domestic use and space heating
    • Heating, ventilation and air conditioning (HVAC)
    Discuss your project →
  • Feasibility Studies

    Life-cycle cost analysis (LCCA)

    • Asset list surveying
    • Net present cost (NPC) assessment
    • Total cost of ownership (TCO) analysis
    • Sensitivity and risk analysis
    • Replacement and maintenance cost forecasting
    • Whole-life cost comparison of design options

    Business case & cost forecasting

    • Business model assessment for new energy projects
    • Capital and operating cost forecasts for new buildings
    • Financing and payback scenarios (CAPEX vs OPEX)
    • Costed reports you can take to your board or your bank
    Discuss your project →
  • Engineering Consultancy

    • Technical proposal writing
    • Tenders and technical management
    • General engineering services
    • Terms of reference (TORs), bills of quantities (BOQs) and cost estimates
    • Site inspections
    Discuss your project →

Our process

How we work

A transparent process, with a named deliverable at every step.

  1. 01

    Discover

    A free consultation to understand your site, consumption, constraints, and goals. You get an honest read on whether a project makes sense — step 1 costs nothing.

    Deliverable: an honest go / no-go read

  2. 02

    Assess

    We measure and model: energy audit, load analysis, resource assessment. You receive a costed feasibility report with payback scenarios you can take to your board or your bank.

    Deliverable: costed feasibility report

  3. 03

    Design

    Detailed engineering of the chosen solution — system sizing, drawings, specifications, and tender-ready documents. Vendor-neutral, so bids compete on your terms.

    Deliverable: tender-ready design package

  1. 04

    Deliver & support

    We stay on your side through procurement, construction, and commissioning, then verify the system performs to the numbers we promised.

    Deliverable: performance verified

  2. 05

    Or, instead of step 4: Install & commission

    We install the system ourselves and commission it on site, testing every component against the design so it performs from day one.

    Deliverable: commissioned, tested system

Start with step 1 — it costs nothing.

Book a free consultation

Selected work

Recent projects

  • One Za’abeel Residential TowerBuilding systems

    One Za’abeel Residential Tower

    Aug – Oct 2023 · Dubai, UAE · Alpin Limited

    MEP and life-cycle cost (LCC) analysis of the tower’s systems — HVAC, chilled and potable water, irrigation, drainage, fire fighting, lighting, power, LV/CCTV/PA and BMS — plus a full energy baseline.

    Role: Energy & Feasibility Consultant – MEP Analyst

    • MEP LCC analysis
    • MEP analysis
    • Energy baseline
    View project →
  • Energy audit

    UN-ESCWA – Energy Audit Level III

    Jul – Aug 2023 · Beirut, Lebanon · UN-ESCWA, with Apave

    Investment-grade (Level III) energy audit, led on site, backed by an energy model and simulation of the building’s consumption and the proposed savings measures.

    Role: Energy & Feasibility Consultant – Lead Auditor

    • Level III audit report
    • Energy model + simulation
    View project →
  • Feasibility & strategy

    KSA Strategic Plan – Vision 2030

    May 2023 – now · Saudi Arabia · LASCO

    Feasibility studies, analysis and environmental impact assessment, with direct consultancy, for regional plans in Tabuk, Tayma, the Northern Borders and Najran.

    Role: Energy & Feasibility Consultant – Strategic Planning

    • Feasibility studies
    • Environmental impact
    • Direct consultancy
    View project →
  • Solar PV

    Serhal Hospital – 178 kWp PV-diesel hybrid

    Jan – Jun 2023 · Lebanon · Serhal Hospital, with H2air

    Engineering design, procurement and commissioning of a 178 kWp solar PV-diesel hybrid system that cuts the hospital’s generator hours.

    Role: Solar Consultant & System Integrator

    • Design & procurement
    • Commissioning
    View project →

About

Who we are

LumiVerde is an independent, engineering-led consultancy for businesses and institutions in the commercial and industrial sectors. With bases in Lebanon and Oman, we work across Europe, the Middle East and Africa, combining energy expertise, rigorous engineering and practical consulting.

We help clients cut energy costs and carbon at every stage: we audit how a site uses energy, model the options and their life-cycle costs, design the solution, then install and commission it, or stay on your side while your contractor builds it. Every recommendation is independent and backed by numbers you can audit, and the engineers you meet on the first call are the ones who deliver the work.

Bases
Lebanon · Oman
Working across
Europe · Middle East · Africa
Sectors
Commercial · Industrial · Institutional

Questions

Frequently asked

What does a first conversation look like?

A free consultation — usually a call — where we discuss your site, your energy consumption, and what you want to achieve. You leave with an honest read on whether a project makes sense, and no obligation.

Which regions do you cover?

We work across Europe, the Middle East and Africa, with bases in Lebanon and Oman, and have delivered projects in more than ten countries.

Do you install systems, or only design them?

Both. We can install and commission PV and solar thermal systems ourselves, or stay on your side while your contractor builds. Either way the design is vendor-neutral, so suppliers compete for your project on your terms.

How do you price your work?

Each engagement is scoped and priced up front, with named deliverables — a report, a design package, a review — so you know exactly what you receive before you commit.

What does an owner's engineer do on a solar or energy project?

An owner's engineer is an independent technical adviser who works for you, the project owner — not for the supplier or the contractor. We review designs and specifications, compare bids, check equipment and warranties, and follow procurement, construction and commissioning, so that what gets built matches what you paid for.

What does a solar feasibility study include?

It tells you whether a system makes sense before you buy anything: an analysis of how and when your site uses energy, an assessment of the roof or land and the solar resource, energy-yield modelling, and a costed comparison of options, with payback measured against what you pay today for grid or generator power. You get a report you can take to any installer.

Can you review a solar quote or EPC proposal we have already received?

Yes. Technical due diligence on proposals is a core part of our work: we check the design assumptions, equipment selection, yield estimates and warranties, and tell you plainly whether the offer is sound, over-sized or missing something. Because we sell no equipment, we have no stake in which bid you choose.

Can solar and battery storage cut our generator use in Lebanon?

It can — how much depends on your load profile, the space you have and how many hours of grid supply you get. We model your actual consumption against grid and generator supply, then size solar, storage or a hybrid of both, so the numbers are clear before you invest.

Get in touch

Let’s plan your next sustainable energy project.

Talk to an engineer, not a sales team — the first consultation is free.

Send your inquiry

The fastest way to reach us is a phone call or a WhatsApp message — an engineer answers, not a call center.

Tell us about your site, your current energy costs, and what you want to achieve, and we’ll come back with an honest read — the first consultation is free.

Call us today